I have got a customer who gets some strange syslog messages on a cisco 2821 (with integrated WAE module) and I cannot found any details about them.
IOS: c2800nm-advipservicesk9-mz.124-11.T2.bin
it seems that there is no impact on the functionality but the router is running in a test environment so I can not say for sure. Perhaps someone could give more details on the messages:
Jun 11 07:24:43: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0 Jun 11 10:24:36: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0 Jun 11 11:24:37: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0 Jun 11 14:24:38: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0 Jun 11 18:24:51: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0 Jun 12 01:24:33: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0 Jun 12 07:24:34: %FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walk er (0.0.0.1/0)., -Traceback= 0x415956CC 0x418CCF28 0x41BADB64 0x41BAC650 0x425E
BC64 0x425EFADC 0x425E0BC4 0x4260A370 0x428AC50C 0x428AC4F0
