06-12-2007 07:32 AM
I am trying to add 3005 VPN concentrators to Ciscoworks.
The devices are failing config archives with the following error:
TELNET Protocol not supported for VPN3000 TFTP Protocol not supported for VPN3000 SSH Protocol not supported for VPN3000
Do VPN3005s not allow for config archiving?
Solved! Go to Solution.
06-12-2007 10:27 AM
That should be sufficient.,
06-12-2007 07:38 AM
The VPN concentrators use HTTPS to fetch their configs. You will therefore need to specify HTTPS credentials in DCR for this device.
06-12-2007 07:50 AM
J,
Thanks.
Isthat all that is needed?
06-12-2007 08:19 AM
Should be provided the CiscoWorks server is allowed to connect to the concentrator.
06-12-2007 09:46 AM
J,
I added a second concentrator, set up both in common services\device and credentials
I set up http, and current mode of https.
I am still getting job failures with the same error.
It seems I have seen the different protocols and their order of use:
RPC
Telnet
SSH
I cannot seem to find this again, is this where I need to add HTTPS?
06-12-2007 09:49 AM
It looks like you've changed the default protocol order. You need to add HTTPS to your ArchiveMgmt Fetch protocol order for the Concentrators.
06-12-2007 10:05 AM
i didn't make any changes, I just remembered seeing it.
As it is now, it has:
Telnet
TFTP
SSH
HTTPS (just added it)
for config fetch and config deploy.
Is there any other job area that would need it added?
06-12-2007 10:27 AM
That should be sufficient.,
06-12-2007 10:40 AM
Once again,
You helped me solve a problem.
It looks good now, config archive is 32 successful and 0 failed.
Don't forget either J,
This was a mess when I started, you have helped me get it working pretty well.
The test will be the scheduled jobs tonight and I will see if everything works.
I need to do some test restores from config archives to see how that works.
But thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide