Aironet 1100 as repeater: radio disabled!?!

Unanswered Question
Jun 12th, 2007
User Badges:

I followed the directions according to the configuration guide 12.3(8)JA but the repeater never connects to the root AP and I notice the radio is "disabled" after setting the AP in repeater mode and it will not let me enable it. Any ideas as to why I cannot get the two Aironet 1100 AP's to connect and why the radio would be "disabled"?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
fmeetz Tue, 06/19/2007 - 03:43
User Badges:
  • Bronze, 100 points or more

Make sure the basic setings such as SSID, Security match on the access point. Also Make sure half the coverage area of the repeater should fall into the Access point coverage area

tstiles44 Tue, 06/19/2007 - 04:36
User Badges:

I have no security in place and the SSID are the exact same. I have the AP's about 15 ft apart so the coverage should be fine. The parent mac address is correct. Any other ideas? Thanks in advance.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode