cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
2
Replies

3750 Upgrade problem

andrewdykes
Level 1
Level 1

I have a 3750 (WS-3750G-24TS) that I am trying to upgrade with no success thus far.

I ftp the image to the flash, verify the image successfully, and then reboot. On boot the image loads for a while then I get the "Error loading image:..." then it loads the old image. I've tried re-uploading the image several times. This worked fine on my other 3750.

I am running advipservices 12.2(25) and I am trying to upgrade to 12.2(37) advipservices.

Any reasons why a verified image would fail to boot?

Thanks,

Andrew

2 Replies 2

Hieu Cao
Level 4
Level 4

Hi Andrew,

You might want to check/set the boot path for the new image. Do a "show ver", "show boot" and "sh flash" to check and verify that you've the right image on flash.

hth,

hieu

Thanks, but I have already verified the boot path, and the image actually starts to decompress. ( Loading...@@@@@@@@) I get about 6 lines of "@" and then I get the error.

Review Cisco Networking products for a $25 gift card