cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
266
Views
0
Helpful
2
Replies

VRF Leaking (Bug?)

random_camden
Level 1
Level 1

I am trying to leak specific routes between two VRF's using the following config.

It filters one way, but doesn;t pass any routes the other. If I replace

export map customer-mgt-range

with

route-target import 39097:701

then all routes get learnt. If I then put the original line back in, it all works fine. Looks like a bug to me, but can't find a matching one on CCO.

ip vrf MGT

rd 39097:701

export map mgt-range

route-target import 39097:999

!

ip vrf TWR1

rd 39097:702

export map customer-mgt-range

route-target import 39097:701

access-list 31 permit 172.31.0.0 0.0.255.255

access-list 32 permit 195.60.197.0

!

route-map customer-mgt-range permit 10

match ip address 31

set extcommunity rt 39097:999

!

route-map mgt-range permit 10

match ip address 32

set extcommunity rt 39097:701

2 Replies 2

Harold Ritter
Cisco Employee
Cisco Employee

What version are you running on this router? Cam you include the whole configuration.

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

IOS is IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF7, RELEASE SOFTWARE (fc1)

I'm not really able to post any more config, as it's sensitive!

Just looking to see if there is a known bug initially..

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: