06-13-2007 04:50 AM - edited 03-03-2019 05:25 PM
I am trying to leak specific routes between two VRF's using the following config.
It filters one way, but doesn;t pass any routes the other. If I replace
export map customer-mgt-range
with
route-target import 39097:701
then all routes get learnt. If I then put the original line back in, it all works fine. Looks like a bug to me, but can't find a matching one on CCO.
ip vrf MGT
rd 39097:701
export map mgt-range
route-target import 39097:999
!
ip vrf TWR1
rd 39097:702
export map customer-mgt-range
route-target import 39097:701
access-list 31 permit 172.31.0.0 0.0.255.255
access-list 32 permit 195.60.197.0
!
route-map customer-mgt-range permit 10
match ip address 31
set extcommunity rt 39097:999
!
route-map mgt-range permit 10
match ip address 32
set extcommunity rt 39097:701
06-13-2007 06:28 AM
What version are you running on this router? Cam you include the whole configuration.
Regards,
06-13-2007 06:54 AM
IOS is IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF7, RELEASE SOFTWARE (fc1)
I'm not really able to post any more config, as it's sensitive!
Just looking to see if there is a known bug initially..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide