Jon Marshall Wed, 06/13/2007 - 06:34
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


You could


1) Use an object-group to define the IP's and then you only have to enter one line in the access-list.

2) You could use 66.333.33.0 255.255.255.248

but this would cover .1 -> .7 and it depends on what the other IP addresses are used for.

3) Type them in individually as you say.


HTH


Jon

Actions

This Discussion