QoS on OC-48 SRP interface on 10720 router

Answered Question
Jun 14th, 2007
User Badges:

We have a DPT ring with 10 10720 routers on it. The ring is connected to an OC-48 SRP interface on each router.


Voice traffic enters and leaves the 10720 on a Fast Ethernet interface; incoming voice has DSCP46 marking on it, and a strict-priority queue is set up outbound on the Fast Ethernet interface.


Is it possible to apply some form of priority queueing on the SRP1/1 interface on the 10720? I have been trying to find something definite about this but so far I have failed.

Correct Answer by swaroop.potdar about 9 years 10 months ago

Router# conf t

Router(config)# interface srp 2/0

Router(config-if)# srp priority-map transmit 5

Router(config-if)# end


Please check this configuration guide, this should help you do the priority or other tasks with the SRP interface.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/srpapsgs.htm


HTH-Cheers,

Swaroop

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
swaroop.potdar Thu, 06/14/2007 - 23:30
User Badges:
  • Blue, 1500 points or more

Router# conf t

Router(config)# interface srp 2/0

Router(config-if)# srp priority-map transmit 5

Router(config-if)# end


Please check this configuration guide, this should help you do the priority or other tasks with the SRP interface.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/srpapsgs.htm


HTH-Cheers,

Swaroop

is_networkteam@... Fri, 06/15/2007 - 02:14
User Badges:

Hi Swaroop


Many thanks for your very useful reply. I have been looking for this kind of information for a long time!

Actions

This Discussion