We received new blade switch 3020 for our HP servers.
We want to limit the bandwidth on a particular interface (gi0/6) of this switch, but unfortunately, the Cisco documentation indicates:
"Gigabit interfaces 0/1 to 0/16 are internal downlink ports to the blade server. The speed for these interfaces are set at 1000 Mbps, and the duplex is set to full; these settings cannot be changed."
Is there a way to force to 100Mbps our interface? The menu of this interface only displays:
1000 Force 1000 Mbps operation
auto Enable AUTO speed configuration
nonegotiate Do not negotiate speed