Does someone know how to downgrade pix515E failover? because our running PIX515E is 6.3(4) but the failover is 6.3(5) and we don't want has risk when upgrade production PIX so it's look like the best solution is downgrade failover. Somebody can help?
Actually it is same as upgrade process.
-Copy the pix***.bin file in the tftp folder
-When you click on the 'show dir' button on the tftp server, the pix***.bin file should be
one of the listed files
-In the configuration terminal mode of the PIX first ping the tftp server computer's ip
address (you should be able to get ping responses)
-Enter the command 'copy tftp flash'
-Enter the ip address of the tftp server computer (press enter)and then enter pix***.bin as the file name (press enter)
-It will ask you 'do you wish to proceed' - press 'y' for yes
-Once you are back to the prompt issue the command 'reload' to reboot the PIX so that the
new software version takes affect
-When the PIX boots up again, issue 'show version' command to confirm if the new software is now running on the PIX.
Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.