Need Assistance setting WEP + MAC filtering

Unanswered Question
drolemc Thu, 06/21/2007 - 09:26

Enable MAC address authorization on access servers (such as wireless APs).

Enable unauthenticated access on the appropriate remote access policy for MAC

address-based authentication, and enable PAP. Create a user account for each MAC address for which you want to provide MAC address authorization. The name of the user account must match the MAC address of the network adapter installed in the computer that the user is connecting from. The user account password must be set to the RADIUS shared secret used between the RADIUS client (such as an AP) and the IAS server. Set the User Identity Attribute registry value to 31 on the authenticating server. To always use the MAC address as the user identity, set the Override User-Name registry value to 1 on the IAS server.

andersonch Thu, 06/21/2007 - 12:21

I setup everything you said but I get the following error message.

Event Type: Warning

Event Source: IAS

Event Category: None

Event ID: 2

Date: 6/21/2007

Time: 3:14:20 PM

User: N/A

Computer: ******

Description:

User 0019aa0d**** was denied access.

Fully-Qualified-User-Name = STANDARD\0019.aa0d.****

NAS-IP-Address = 172.16.3.43

NAS-Identifier = WestWingap

Called-Station-Identifier = 000c.30be.****

Calling-Station-Identifier = 0019.aa0d.****

Client-Friendly-Name = WestWing

Client-IP-Address = 172.16.3.43

NAS-Port-Type = Wireless - IEEE 802.11

NAS-Port = 576

Proxy-Policy-Name = Use Windows authentication for all users

Authentication-Provider = Windows

Authentication-Server =

Policy-Name =

Authentication-Type = PAP

EAP-Type =

Reason-Code = 16

Reason = Authentication was not successful because an unknown user name or incorrect password was used.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Data:

0000: 2e 05 07 80 ...€

Any ideas why I get this?

Actions

This Discussion

 

 

Trending Topics - Security & Network