Problem router 2621xm

Answered Question
Jun 14th, 2007
User Badges:

Dea All,


Now i had the problem, could you help me?

1- i had router 2621xm:After i configure int f0/0 than no shut it show message like this:

Router(config)#int f0/0

Router(config-if)#ip add 10.10.10.1 255.255.255.0

Router(config-if)#no shut

*Mar 1 00:00:59.625: %AMDP2_FE-1-INITFAIL: CSR0=0x0000

Router(config)#

------------

by the way on router 2621xm had 2 fastethernet but my router i can see one interface is fastethernet 0/0.

What's going on?

Best Regards,

Join

Correct Answer by Richard Burts about 9 years 9 months ago

Join


It sounds like a hardware problem. Probably the best thing would be to open a case with Cisco TAC.


HTH


Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Richard Burts Thu, 06/14/2007 - 18:47
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Join


It sounds like a hardware problem. Probably the best thing would be to open a case with Cisco TAC.


HTH


Rick

join_sn09 Thu, 06/14/2007 - 19:45
User Badges:

Dear Rick,


Thank you for your reply.


Best Regards,

Join

Actions

This Discussion