Mechanical characteristics of MAR3200 cards

Unanswered Question
Jun 14th, 2007
User Badges:


I will use a MAR3200 in a subway environment. Only the FESMIC, MARC and MRPC will be inserted in the enclosure: the WMIC cards will be installed at each train extremity and the SMIC is not required. The allowed space is not huge and the enclosure I will design must be a small sized. I searched information about mechanical characteristics (size, fix points?) for these cards and the associated thermal plates. I am also interested by information about the connectors (type / reference, pins assignment?). Any information or link about these topics will be helpful.

Thanks by advance


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
martec_acbarcelo Thu, 06/21/2007 - 23:30
User Badges:

Hi Shabir,

Thanks for the answer. I know this doc but I need more detailed information about the mechanical characteristics of the MAR3200 cards to define the rack which they will be inserted in.

Best Regards,


Richard Atkin Wed, 06/27/2007 - 11:50
User Badges:
  • Silver, 250 points or more

The cards are PC104 standard, so your best bet is to check out the standards.

martec_acbarcelo Tue, 07/03/2007 - 00:30
User Badges:

Thanks for the answer. Do you have any information about the connectors: location on the PC104 cards, pin assignment, type...


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode