Hello all, I've configured CME4.1 in a 2851 with CUE 2.3. I'm facing some issues with call forwards. Here's the scenario:
Call-forward-All configured on IP Phone A to a external landline or handphone number-
a) IP Phone B calling IP Phone A, call forward works. Land line or handphone receives call.
b)External handphone call DID of IP Phone A. Calling phone can hear ring tone, but the landline/handphone which was forwarded to from IP Phone A is not ringing. After a while, the ringing tone on the calling phone stops and we get slow engage tones which is not our usual telco engage tone in S'pore.
If the targeted call-forward-all number is configured as an internal extension of another IP Phone, everything works fine.
Here's the configuration in the attached file.
Any idea what the issue is?
my bad. I had you modify the calling number plan/type, but left the called number plan/type (that is even more important), unchanged.
You can do that in three ways, pick the one you like better:
- under interface e0/0/0:15, "isdn map address ... type unknown"
or, under the outgoing DP, "numbering-type unknown"
or, a translation-rule outgoing for called, matching everything like: // // type any unknown. You can apply it either at DP or voice-port level.
Let us know if it works!