06-15-2007 01:51 AM - edited 03-05-2019 04:45 PM
HI,
I have a 1721 with two wics.. 1wic 4 lan port and the other one is a 1wic adsl.
Both stablish vpn to the same public ip.
Now, default static route is behind the first connection, but if it crashes?
how can I configure the router to route the packect from the first line to the second one if the first fails?
best regars
06-15-2007 02:24 AM
If your question is how the second preferred routing is to be done , then use a higher matric towards the ATM interface for the ADSL link. If your question is how to detect the ethernet going down , that will be either by a routing protocol or by tracking some reachable ip which when unreachable the secondary route will be used.
06-15-2007 04:19 AM
Hi,
The router has this configuration:
ip route 0.0.0.0 0.0.0.0 publicIP permanent
The solution will be:
ip route 0.0.0.0 0.0.0.0 publicIP permanent metric 1
ip route 0.0.0.0 0.0.0.0 publicIP permanent
metric 2
????
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide