Lossing network resources when connected to Cisco VPN

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
insbannis_j Fri, 06/15/2007 - 07:47

Been a while since I worked on VPN's but from memory you have two options

1.enable split tunneling

2.Use Local LAN access setting on the VPN Client.

Not sure of the platforms you are running however after a quick search the following links may provide you some direction.

VPN to Concentrator Split Tunneling

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00806f34fa.shtml

VPN to Concentrator Local LAN Access

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00806f34e6.shtml

Hope this helps and is what you meant by "connect to a PC, via CISCO VPN"

Good Luck,

Justin

Actions

This Discussion