cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
239
Views
0
Helpful
1
Replies

Lossing network resources when connected to Cisco VPN

chrisjohnston
Level 1
Level 1

Hello,

When I connect to a PC, via CISCO VPN, I appear to loss access to;

a) my network drives

b) Internet connection.

Is this standard for CISCO VPN Connection?

Is there a way to configure it so that I can still get access to the network drive at my end?

1 Reply 1

insbannis_j
Level 1
Level 1

Been a while since I worked on VPN's but from memory you have two options

1.enable split tunneling

2.Use Local LAN access setting on the VPN Client.

Not sure of the platforms you are running however after a quick search the following links may provide you some direction.

VPN to Concentrator Split Tunneling

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00806f34fa.shtml

VPN to Concentrator Local LAN Access

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00806f34e6.shtml

Hope this helps and is what you meant by "connect to a PC, via CISCO VPN"

Good Luck,

Justin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: