qos preclassify command

Answered Question
Jun 15th, 2007
User Badges:

If doing QOS on a tunnel which is using IPSec, do you put the pre-classify command on the tunnel interface or in the policy map?


here's the config I've been given, and I notice that they've put it in 2 places.


Thanks,

Lisa Gcrypto map CRX0 10 ipsec-isakmp

description To ATL-CRX-7206A router

set peer 65.199.221.97

set transform-set TSI

match address CUSTNAME-ATLCRX

qos pre-classify

interface Tunnel1

description GRE Tunnel to Atlanta

ip address TUNNEL1_IPADDR_toATL 255.255.255.252

ip mtu 1440

qos pre-classify





Correct Answer by PAUL TRIVINO about 9 years 9 months ago

I don't know if you *need* it in both places but our configs *use* it in both places.


HTH


Paul

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
PAUL TRIVINO Fri, 06/15/2007 - 15:42
User Badges:
  • Bronze, 100 points or more

I don't know if you *need* it in both places but our configs *use* it in both places.


HTH


Paul

Actions

This Discussion