have problem switch 6509

Unanswered Question
Jun 15th, 2007

Dear All,

I had switch cisco ws-c6509-E and have module ws-x6148A-GE-TX 48-port 10/100/1000 Base-TGE.On port g4/9 after i

shut down interface and no shut agian,it show message below:

HQ-6509(config-if)#int g4/9

HQ-6509(config-if)#shu

HQ-6509(config-if)#no shut

HQ-6509(config-if)#

00:44:03: %PM-SP-4-ERR_DISABLE: diagnostics error detected on Gi4/9, putting Gi4/9 in err-disable state

00:44:03: %PM-SP-STDBY-4-ERR_DISABLE: diagnostics error detected on Gi4/9, putting Gi4/9 in err-disable state

HQ-6509(config-if)#

what's going on?

Note:On port Gi4/9 connect to my pc,don't

link connection.

Best Regards,

join

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mohammedmahmoud Sat, 06/16/2007 - 00:10

Hi,

AFAIK there is a physical error on this port, as the diagnostics provide hardware-specific fault-detection.

HTH,

Mohammed Mahmoud.

join_sn09 Sat, 06/16/2007 - 01:47

Dear Mohammed ,

This problem,Can i fix it by myself?

Or need to send to factory?

Best Regards,

Join

Actions

This Discussion