06-17-2007 08:46 AM - edited 03-11-2019 03:31 AM
New to 506e. Just installed. Replaced a Netgear FVS318. Cable for the internet connection. Pix 6.3(4) PDM 3.0(2). Internet is now doing a whooping 222k. Where should I start looking?
Solved! Go to Solution.
06-17-2007 10:19 AM
Looks like you possibly have a bad cable or a duplex mismatch. Are you hard coding the interface? (speed/duplex)
06-17-2007 09:39 AM
First I would look at your interfaces for errors. Post a copy of your "sh int".
06-17-2007 10:17 AM
Here it is:
Result of firewall command: "sh int"
interface ethernet0 "outside" is up, line protocol is up
Hardware is i82559 ethernet, address is 0013.60ac.bc3d
IP address 24.166.106.239, subnet mask 255.255.254.0
MTU 1500 bytes, BW 100000 Kbit full duplex
262124 packets input, 110396808 bytes, 0 no buffer
Received 184612 broadcasts, 51 runts, 0 giants
5921 input errors, 2796 CRC, 3074 frame, 0 overrun, 2796 ignored, 0 abort
55770 packets output, 6130659 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
input queue (curr/max blocks): hardware (128/128) software (0/49)
output queue (curr/max blocks): hardware (0/3) software (0/1)
interface ethernet1 "inside" is up, line protocol is up
Hardware is i82559 ethernet, address is 0013.60ac.bc3e
IP address 192.168.0.254, subnet mask 255.255.255.0
MTU 1500 bytes, BW 100000 Kbit full duplex
88463 packets input, 8799641 bytes, 0 no buffer
Received 10697 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
102423 packets output, 110751550 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
input queue (curr/max blocks): hardware (128/128) software (0/15)
output queue (curr/max blocks): hardware (5/41) software (0/1)
Lots of errors on the WAN port
06-17-2007 10:19 AM
Looks like you possibly have a bad cable or a duplex mismatch. Are you hard coding the interface? (speed/duplex)
06-17-2007 10:21 AM
Yea, I think it is a duplex problem. It was auto and now I'm trying different settings. We'll see what happens.
06-17-2007 10:42 AM
Thanks.
100full did the trick.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide