Bridge1300

Unanswered Question
Jun 17th, 2007

HI, I have a doubt the bridge 1300 series, with connectors for external antennas,specifically the Cisco Aironet 1300 Series Outdoor Access Point/Bridge with RP-TNC Type Connectors

AIR-BR1310G-X-K9-R,

can be used both antennas, the internal antenna and the external one, at the same time? ...

Please respond to my doubt

thanks..

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rob.huffman Mon, 06/18/2007 - 05:36

Hi Ricardo,

Your doubt is "well founded" The 1300 Series comes in two versions. One with Integrated Antennas and one with RP-TNC type connectors for external antennas. Neither model has both Internal and External Antennas;

The Cisco Aironet 1300 Series with integrated antenna can be quickly installed to provide a LAN bridge to a remote site or multiple sites. The 1300 Series with antenna connectors supports a variety of Cisco 2.4-GHz antennas, providing range and coverage versatility.

Antenna Interface

AIR-BR1310G-x-K9 or AIR-LAP1310G-x-K9:

Air interface (integrated directional antenna)

AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R:

Two RP-TNC type connectors for external antennas

From this good doc;

http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html

Hope this helps!

Rob

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode