06-18-2007 01:44 AM - edited 03-09-2019 06:12 PM
What is the meaning of [no-xauth, no-config-mode]?
Disable VPN Software connection if run [no-xauth, no-config-mode]?
Solved! Go to Solution.
06-19-2007 12:13 AM
Hi,
no-xauth is used the extended authentication, that is to have the user prompted for a user name and password before connecting
no-config-mode is used to disable pushing data to the user connecting through the VPN client like the ip address, the DNS server, WINS server ....
both of the above are mandatory to exist when connecting using a software VPN client.
I hope that the above answers your questions.
Kindest regards,
Shadi`
06-19-2007 12:13 AM
Hi,
no-xauth is used the extended authentication, that is to have the user prompted for a user name and password before connecting
no-config-mode is used to disable pushing data to the user connecting through the VPN client like the ip address, the DNS server, WINS server ....
both of the above are mandatory to exist when connecting using a software VPN client.
I hope that the above answers your questions.
Kindest regards,
Shadi`
06-19-2007 12:40 AM
If I would like make connection through VPN client, how I can do it?
06-19-2007 02:18 AM
Hi,
By default, Xauth and config mode are enabled for VPN traffic, which means that you don't have to enable it.
usually disabling this traffic is done for site to site VPN tunnels.
following is a configuration example for configuring PIX and VPN client, I hope it would be helpful :)
K.Regards,
Shadi`
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide