WLC 2006 won't boot

Unanswered Question

Greetings all!

Over the weekend one of my engineers 'broke' a 2006 WLC. He was attempting an upgrade (kinda fuzzy on the details) and now when it boots, the console shows:

[ Minimal BASH-like line editing is supported. For the first word, TAB

lists possible command completions. Anywhere else TAB lists the possible

completions of a device/filename. ]


I called TAC and they want to RMA the unit but that will take 10+ days. Does anyone have any information regarding how to recover this box? I don't care about the old config, etc. but would like to not have a controller down for that period of time.

Many thanks in advance!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ericgarnel Mon, 06/18/2007 - 07:57
User Badges:
  • Gold, 750 points or more

It is either looking for an image to boot and can't find one or the boot config has been wiped. do a google search on grub commands.

grub is the most recent & common boot loader for linux systems. If the image is still there, there may be a way to bring up the controller and hopefully recover. you don't have nbd smartnet on the controller?


This Discussion



Trending Topics - Security & Network