cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
344
Views
3
Helpful
2
Replies

WLC Isolating Users

bertel
Level 1
Level 1

Hi All, I am testing a Cisco 2000 Series Wireless Controller with an eye on the WISM. I would like to know if any one out there has been successful at being able to throw troubled users into a limited access vlan for self remediation and isolation through a WLC. The limitation seems to be in order to place someone in a different vlan one must create an additional SSID to associate with the limited access vlan that is not good as we cannot force users to associte with an addition SSID. Anybody find a way to create two vlans which are associated with ONE SSID?

Regards,

Brian

2 Replies 2

mhale
Level 1
Level 1

The WLC will have no idea which vlan to use in this scenario. You can do this through a clean access setup with the WLC.

http://cisco.com/en/US/partner/products/ps6128/prod_technical_reference09186a0080540637.html

Premdeep Banga
Level 7
Level 7

Hi,

Another solution would be,

(Posture Validation + Dynamic VLAN assignment) using ACS

Regards,

Prem

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: