Extra 0's in caller Id

Unanswered Question
Jun 18th, 2007
User Badges:

Hi there,


I got an issue about incoming call IDs on screen of my Cisco IP Phone. When someone calls me then I see always a couple of 0?s as prefix to incoming call. Sometimes it?s 2 0?s (zeros) en sometimes 3 0?s (zeros). I hope this will be more clear with the following example:


Caller: 0619540331

Called: 0205745897

Jun 5 13:21:51.655: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x3222

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98393

Exclusive, Channel 19

Calling Party Number i = 0x2183, '619540331'

Plan:ISDN, Type:National

Called Party Number i = 0xA1, '205745897'

Plan:ISDN, Type:National

Sending Complete

Jun 5 13:21:51.667: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xB222

Channel ID i = 0xA98393

Exclusive, Channel 19


On my phone?s screen I see ?00619540331? as Caller ID. And sometimes I see it like this ?000619540331? on my screen. I hope someone can help me t solve this issue. I?m using CallManager 5.0.


Cheers,

Yasa

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion