OID for AP1230 free and used memory

pppyyyppp · ‎06-18-2007

We have used the following OID:

1.3.6.1.4.1.9.9.48.1.1.1.5.1 = used memory

1.3.6.1.4.1.9.9.48.1.1.1.6.1 = free memory

However, when issue show proc memory, the value obtained from the above appeared different. Can someone advise if we are using the correct OID?

Joe Clarke · ‎06-18-2007

These are the correct objects, but the APs add the processor and I/O memory in the show proc mem output. Therefore, you need to walk the ciscoMemoryPoolTable, and get the Used and Free for the I/O pool in addition to the Processor pool. The sum of those numbers will yield values that agree with show proc mem.