7200 router with BRI interfaces

Unanswered Question
Jun 19th, 2007

Dear Sir,


i have a cisco 7204 Router with 7200-NPE-G2, and i want to install 2 BRI intrfaces on it to provide backup connections, i want to know what is the interfaces that can installed on this router to brovide BRI connections



Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
balajitvk Tue, 06/19/2007 - 02:34

Hi,


The PA-8B-ST port adapter provides up to eight S/T-type BRI interfaces used to connect to an ISDN WAN through an external Network Termination 1 (NT1) device.


The PA-4B-U provides up to four BRI interfaces used to connect to an ISDN WAN through its internal NTI device.


Each PA-8B-ST and PA-4B-U interface consists of two bearer (B) channels that can transmit and receive data at the rate of 64 kbps, full-duplex, and one data (D) channel that can transmit and receive data at the rate of 16 kbps, full-duplex. The interfaces use an RJ-45 receptacle and standard straight-through twisted-pair cable.


Rate if it does,

Rgs.

justanas1 Tue, 06/19/2007 - 02:56

dear balajitvk

Thank you, but the problem is that i cant find these modules(PA-8B-ST and PA-4B-U) when i work on the dynamic configuration tool


Thanks

justanas1 Tue, 06/19/2007 - 03:11

dear sir,

an error appear in the configuration tool dectate that the NPE-G2 is not compatible with PA-8B-ST, so what i can do in this situation


Thanks


Actions

This Discussion