I have a network on which I want to configure some E1s using VWIC-2MFT-E1 on Cisco 3825/3845 Routers. My plan is to bundle 2 E1 s on the card to give me a 4MB channel that can be accessed by one single Ip address. How can I do this i.e Sample config.
2. Using an NM -1A - OC3 card, I want to split an 0C3 link into 2 different links with 2 different IPs with one having a bandwidth of 102 Mbps and the other using the remaining bandwidth. How can I do this i.e Sample config