MDS 9020 Log Files

wdonald · ‎06-19-2007

Have had a bad SFP creating errors, and log entries. Problem is that when log is full, the switch re-boots. Does anyone know if I can clear the log out of old messages.

hadbou · ‎06-25-2007

Periodically check how full the /dev/shm is using the following command

Device # *sh system internal flash | inc shm*

none 102400 5744 96656 6% /dev/shm

2. If you see that the %-used keeps on increasing then you need to find

out which files(s) in /dev/shm is causing this. There is no CLI command for

this. One has to load debug plugin and check file sizes in /dev/shm using "ls"

command.

Additionally you can run "system pss shrink" command to compact the pss

files to make some more room /dev/shm.