Yes, I used Cisco WAAS version 4.0.9,

i configure WCCP on both switch catalyst on interface vlan :

ip wccp 61

ip wccp 62

int vlan888

ip wccp 61 redirect out

ip wccp 62 redirect in

on interface to WAE ;

ip wccp redirect exclude in

regards

afdil

Zach,

Have you ever try WAAS to accelerate MIMIX traffic? Could you share your configuration?

Thanks,

Iwan

Iwan,

I have not personally used WAAS to accelerate MIMIX traffic.

Thanks,

Zach

Hi Zach,

But, do you have any documentation that mention WAAS able to accelerate MIMIX traffic or user guide about it? Because I cannot find it on cisco website and I am afraid that Cisco WAAS is unable to accelerate MIMIX.

Thanks,

Iwan

Ivan,

I checked internally, but was unable to find any references for WAAS optimizing MIMIX traffic. However, this doesn't mean that it isn't possible. Have you tried? Do you know the TCP ports being used?

Zach

Zach,

I have tried it with several scenario. First, using default WAAS policy. Second, create new policy using destination and source port from 1000-65000. Both scenario give no result. I have no idea the exact TCP port for MIMIX.

Iwan

zach,

when i'm doing POC to optimize MIMIX,

i use command :

#show tfo connection summary

and output of this command :

Local-IP:Port Remote-IP:Port Conn Type

10.204.230.2:50007 10.204.229.2:56028 PT In Progress

10.204.229.2:56028 10.254.20.11:50007 PT In Progress

ip add 10.204.230.2 is MIMIX server in DC

ip add 10.204.229.2 is MIMIX server in DRC

i already used that port to optimize MIMIX,

but still not optimize

AFDILAH,

You can use the debug command:

debug tfo conn auto

to determine why the connection is going into pass-through.

Zach

Thank Zach, we will try it. But unfortunately, we cannot do it soon. We need time to setup the lab.

Thanks.