Edison Ortiz Wed, 06/20/2007 - 07:32
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

From the file you posted:


Chassis Temperature = 36 degrees Celsius

Chassis Over Temperature Threshold = 75 degrees Celsius

Chassis Critical Temperature Threshold = 95 degrees Celsius


_____________________________________________


36 Celsius seems a bit high operating environment and I believe that's the reason for the warning light being on.

alessandro.dona Wed, 06/20/2007 - 07:39
User Badges:

Cisco says the led should go orange when Supervisor engine temperature sensor exceeds minor threshold (that is 75 Celsius)


Edison Ortiz Wed, 06/20/2007 - 11:13
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Please post the output from typing


show test

and

show module


Edison Ortiz Wed, 06/20/2007 - 11:27
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

I checked your file again and :


PEM WS-X4095-PEM -- bad/off


This can also be causing the orange led.

JORGE RODRIGUEZ Wed, 06/20/2007 - 11:23
User Badges:
  • Green, 3000 points or more

hi, it could be your FAN, please so

" show sys " and look at FAN status.


HTH


Jorge

royalblues Wed, 06/20/2007 - 12:20
User Badges:
  • Green, 3000 points or more

Friend,


The SuP shows orange if either one of the power supply or the Fan is switched off.


as per the logs, it seems either the fan or power supply is not working and hence you are seeing the orange light


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html


HTH, rate if it does

Narayan

Actions

This Discussion