sup status led orange. Why?

alessandro.dona · ‎06-20-2007

Hi to all.

I have a 4006 with:

Supervisor III 1000BaseX (GBIC)

48 10/100BaseTX (RJ45)V

status led is orange but in the log there is nothing.

attached th sh env that looks to be ok!

any idea about this problem

Edison Ortiz · ‎06-20-2007

From the file you posted:

Chassis Temperature = 36 degrees Celsius

Chassis Over Temperature Threshold = 75 degrees Celsius

Chassis Critical Temperature Threshold = 95 degrees Celsius

_____________________________________________

36 Celsius seems a bit high operating environment and I believe that's the reason for the warning light being on.

alessandro.dona · ‎06-20-2007

Cisco says the led should go orange when Supervisor engine temperature sensor exceeds minor threshold (that is 75 Celsius)

Edison Ortiz · ‎06-20-2007

Please post the output from typing

show test

and

show module

Edison Ortiz · ‎06-20-2007

I checked your file again and :

PEM WS-X4095-PEM -- bad/off

This can also be causing the orange led.

JORGE RODRIGUEZ · ‎06-20-2007

hi, it could be your FAN, please so

" show sys " and look at FAN status.

HTH

Jorge

Jorge Rodriguez

royalblues · ‎06-20-2007

Friend,

The SuP shows orange if either one of the power supply or the Fan is switched off.

as per the logs, it seems either the fan or power supply is not working and hence you are seeing the orange light

HTH, rate if it does

Narayan