cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
665
Views
10
Helpful
11
Replies

4006 IOS question

Neuromancer
Level 1
Level 1

Can anybody please show me where I can download an IOS for a Sup3 on a 4006. The main download links only send me to old CatOS images for a Sup1 and 2.

Thanks!

11 Replies 11

Edison Ortiz
Hall of Fame
Hall of Fame

You can't run IOS on 4006 switches. You need to upgrade the chassis to a 4500 series with Sup II+, III, IV or V.

I currently have a Sup III installed in a 4006 chassis with an older IOS image loaded in it. When I follow the "Download Software" links from the main page, I can find the 4006 in that folder heirarchy thing, however it takes me to images for the old SUP I and II.

I can't find any links on cisco.com for IOS images for the SupIII. Any help/links is appreciated!

Hi,

I Always use the Cisco Feature Navigator:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Search by Feature

or

Search by Platform

NOTE: But as Edison has said it should be 4500 with Sup3.

HTH,

Mohammed Mahmoud.

So in the "feature navigator" can I use the IOS images from the "CAT4500-SUP3" option for use in my 4006?

Hi,

Yes go ahead as they both use WS-X4014.

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a008063c36f.shtml

Supervisor Engine III (WS-X4014) is supported on these Chassis: 4006, 4503, 4506.

HTH,

Mohammed Mahmoud.

It sounds like you have a 4506, not a 4006. Can you post a show ver ?

Now I'm confused. It is definitely a 4006. The chassis has 4006 printed on it and the sh ver confirms it. Here's a copy of my sh ver:

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I5S-M), Version 12

.2(25)EWA8, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 24-Jan-07 15:18 by pwade

Image text-base: 0x10000000, data-base: 0x114EECF0

ROM: 12.1(12r)EW

Dagobah Revision 55, Swamp Revision 16

xxx uptime is 3 weeks, 20 hours, 31 minutes

System returned to ROM by reload

System restarted at 02:39:06 KLT Wed May 30 2007

System image file is "bootflash:cat4000-i5s-mz.122-25.EWA8.bin"

cisco WS-C4006 (MPC8245) processor (revision 7) with 262144K bytes of memory.

Processor board ID FOX0731002C

MPC8245 CPU at 300Mhz, Supervisor III

Last reset from Reload

4 Virtual Ethernet interfaces

32 FastEthernet interfaces

40 Gigabit Ethernet interfaces

467K bytes of non-volatile configuration memory.

and heres part of a show modules:

Chassis Type : WS-C4006

Power consumed by backplane : 0 Watts

Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 2 Supervisor III 1000BaseX (GBIC) WS-X4014 xxx

Ah, you have WS-X4014. That Supervisor is the same from a 4503/4506 switch.

Go to

http://www.cisco.com/kobayashi/sw-center/

Click on Cisco IOS Software

Select IOS 12.2 Release

Select CAT4500 Sup3

Hi,

On, the feature navigator, choose 4506 with sup 3 and you'll get your IOS (4006 uses the same IOS as the 4506).

Give it a try and feed us back.

Note: I think that what you are using is the latest code.

HTH,

Mohammed Mahmoud.

Just wanted to let you guys know that it worked like a charm!

Thank you very much for your help!

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: