×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
paolo bevilacqua Wed, 06/20/2007 - 12:52
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

A grounding lug is needed only for devices not rack mounted. If the rack itself is well grounded, all the devices fastened to it are grounded as well.


Hope this helps, please rate post if it does!

mohammedmahmoud Wed, 06/20/2007 - 12:56
User Badges:
  • Green, 3000 points or more

Hi,


Totally agree with Paolo, the device chassis itself of the rack mounted devices does this for us (although some rack mounted devices have a grounding lug).


[edit] but i've found that the 3560 has a ground lug:

http://www.cisco.com/en/US/products/ps7077/products_installation_guide_chapter09186a008076393e.html#wp1223523



HTH,

Mohammed Mahmoud.

Actions

This Discussion