Hi all, In our HQ we have a WAN 2800 router, its LAN Eth0 address is 188.8.131.52 which is the gateway to all remote offices. Also HQ we have a firewall connected to the internet, its LAN Eth0 address is 184.108.40.206. All users on the HQ LAN have their Gateway pointing to he WAN 2800 220.127.116.11. I need to allow all users on the LAN and WAN to use an internet service on TCP port 5631. I need to forward a TCP port 5631 from the WAN 2800 Router 18.104.22.168 to re-direct to the firewall 22.214.171.124. When I applied a NAT rule on the 2800 it completed stops internet traffic, all help will be appreciated.