I agree with Jagdeep

Also would recomend checking the following link for UCP:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/ucp41/ucp.htm

Thank you for your response, but at this moment a Windows Server is impossible for me (reason: money) other possibilities? Apache/Linux?

Hi,

I have made it to run on Apache server, though only tested with HTTP, not HTTPS. But I know this for sure that it works with Apache.

Instructions will be same as for IIS, just make sure that you give enough privileges on "securecgi-bin" folder so that it can execute the scripts.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/ucp41/ucp.htm

Have done this long way back. But yes this works.

Its worth a shot.

Regards,

Prem

Hi ,

I have cisco ACS 1113 ,i have made windows vista desktop with IIS 7 ,i have configured iis ,given required privilege to securecgi-bin but still,'secure-bin' is not executing ,...i will be thankful if any one help me...thxxx

Hi,

IIS 7 is not tested with UCP, so it may/may not run properly. And it has not been tested with vista desktop.

To make it run, please ensure that you have following requirements fulfilled ,

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/ucp41/ucp.htm#wp1041168

To install UCP, you must have a web server that runs either:

?Microsoft IIS 5.0 (included with Windows 2000)

?Microsoft IIS 6.0 (included with Windows Server 2003)

Regards,

Prem

Thax ...

FYI,

/-------------------------/

To install UCP, you must have a web server that runs either:

?Microsoft IIS 5.0 (included with Windows 2000)

?Microsoft IIS 6.0 (included with Windows Server 2003)

/-------------------------/

So if you face any issues with operation of UCP on Apache, TAC may not be able to help.

But we are here, so lets try our best :)

Cheers,

Prem