Routing Question .

Answered Question
Jun 20th, 2007
User Badges:

Hi NetPro,


i have some routing question need expert to advice. kindly see the attachment file.


now , i want to see the Tester Pc from Building A.


how do i route it ?


Regars,

Kitten



Attachment: 
Correct Answer by amit_kulshrestha_2 about 9 years 11 months ago

Hi Ney,


As per you diagram your core switch of building A and B are directly connected.you can put a static route in core sw of building A like:-

ip route 0.0.0.0 255.255.255.0 172.17.12.6


And put route in core sw of building B like :-

ip route 172.17.12.6 255.255.255.0 192.9.1.12


"YOU CAN USE WILDCARD MASK ALSO"


Kindly revert if it works, also revert if it does not works.Rate it.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
royalblues Wed, 06/20/2007 - 23:17
User Badges:
  • Green, 3000 points or more

Which one are the layer 3 devices in your diagram


Narayan

ney25 Wed, 06/20/2007 - 23:44
User Badges:

Hi Narayan,


172.20.1.6 is the my core switch for building A. whereby 172.17.12.6 is core switch for building B.


now i wanna see the tester PC (192.9.1.12) from server (172.20.72.60). possible ?


regards,

kitten

royalblues Thu, 06/21/2007 - 00:06
User Badges:
  • Green, 3000 points or more

Ok..


all you can do is to connect the core switches on 2 routed ports and run static routing.


for eg

on sw1


int fa 1/1

no switchport

ip address 10.10.10.1 255.255.255.252


ip route 192.9.1.0 255.255.255.0 10.10.10.2


on SW2

int fa 1/1

no switchport

ip address 10.10.10.2 255.255.255.252


ip route 172.20.72.60 255.255.255.0 10.10.10.1



HTH, rate if it does

Narayan

ney25 Thu, 06/21/2007 - 00:26
User Badges:

Hi Narayan,


you meant both core-switches have to do static route ?


thanks .


Regards,

kitten



royalblues Thu, 06/21/2007 - 00:37
User Badges:
  • Green, 3000 points or more

Yes,


Both switches need to know the routes for the other subnets


Narayan

Correct Answer
amit_kulshrestha_2 Tue, 07/10/2007 - 00:22
User Badges:

Hi Ney,


As per you diagram your core switch of building A and B are directly connected.you can put a static route in core sw of building A like:-

ip route 0.0.0.0 255.255.255.0 172.17.12.6


And put route in core sw of building B like :-

ip route 172.17.12.6 255.255.255.0 192.9.1.12


"YOU CAN USE WILDCARD MASK ALSO"


Kindly revert if it works, also revert if it does not works.Rate it.

Actions

This Discussion