we are trying to connect a matra PABX on a 2801 gateway with ccm 4.1 (mgcp)
we crossed pin 4,5 and 3,6 on the RJ-45 cable
green LED 0K is ON
when we call a matra phone (PABX) from an IP-phone, we have busy tone
should be a problem with TEI ?
debug isdn q921 is ON.
gw2#term mon
gw2#
*Jun 21 08:55:28.631: ISDN BR0/0/0 Q921: Net TX -> IDREQ ri=23669 ai=127
*Jun 21 08:55:30.631: ISDN BR0/0/0 Q921: Net TX -> IDREQ ri=9158 ai=127
*Jun 21 08:55:31.679: ISDN BR0/0/0 Q921: Net TX -> RRp sapi=0 tei=0 nr=23
*Jun 21 08:55:31.679: ISDN BR0/0/0 Q921: Net RX <- RRp sapi=0 tei=0 nr=0
*Jun 21 08:55:31.679: ISDN BR0/0/0 Q921: Net TX -> RRf sapi=0 tei=0 nr=23
*Jun 21 08:55:31.695: ISDN BR0/0/0 Q921: Net RX <- RRf sapi=0 tei=0 nr=0
*Jun 21 08:55:32.631: ISDN BR0/0/0 Q921: Net TX -> IDREQ ri=24615 ai=127
The support of VOICE OVER IP forum suggested that I post my problem on this forum
Many thanks !
sh run / sh ccm-mgr / sh int