06-21-2007 05:43 AM
Hi,
Is there any way that I can force the path for a EoMPLC VC other that playing with the IGP ? Also since the mpls core is redundant I want the have a VC via one path and if that path fails the VC should stay down ... is this possible ?
Regards,
Cristian
Solved! Go to Solution.
06-21-2007 07:32 AM
I believe Harold missed the /products/ folder in the link as a typo.
Anyways here is the link again which he wants you to use.
http://www.cisco.com/en/US/products/ps6922/products_feature_guide09186a008067cf79.html.
06-21-2007 06:54 AM
You can actually achieve this by using MPLS TE and the tunnel selection feature.
You would first configure a tunnel, configure the pseudowire to use this specific tunnel and not to take any other path if the tunnel goes downand then configure this specific pseudowire-class on the xconnect statement.
Please refer to te following URL for more information the tunnel selection feature.
http://www.cisco.com/en/US/partner/ps6922/products_feature_guide09186a008067cf79.html
Hope this helps,
06-21-2007 06:55 AM
The URL I just sent might not work for you. Please use this one instead.
http://www.cisco.com/en/US/ps6922/products_feature_guide09186a008067cf79.html
Regards,
06-21-2007 07:32 AM
I believe Harold missed the /products/ folder in the link as a typo.
Anyways here is the link again which he wants you to use.
http://www.cisco.com/en/US/products/ps6922/products_feature_guide09186a008067cf79.html.
06-21-2007 08:46 AM
Sorry about that. Thanks Swaroop for posting the proper URL.
Regards,
06-21-2007 01:06 PM
I think I've understand it. Just create the tunnel from PE to PE via a predefined path and a pseudowire-class using that tunnel and just apply the pw-class to xconnect. I wouldn't use TE since I'm not very familiar to it but I guess I will have to start look into it more closely.
Thanks for the help,
Cristian
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: