cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
726
Views
10
Helpful
5
Replies

EoMPLS VC Path

cristiangal
Level 1
Level 1

Hi,

Is there any way that I can force the path for a EoMPLC VC other that playing with the IGP ? Also since the mpls core is redundant I want the have a VC via one path and if that path fails the VC should stay down ... is this possible ?

Regards,

Cristian

1 Accepted Solution

Accepted Solutions

I believe Harold missed the /products/ folder in the link as a typo.

Anyways here is the link again which he wants you to use.

http://www.cisco.com/en/US/products/ps6922/products_feature_guide09186a008067cf79.html.

View solution in original post

5 Replies 5

Harold Ritter
Cisco Employee
Cisco Employee

You can actually achieve this by using MPLS TE and the tunnel selection feature.

You would first configure a tunnel, configure the pseudowire to use this specific tunnel and not to take any other path if the tunnel goes downand then configure this specific pseudowire-class on the xconnect statement.

Please refer to te following URL for more information the tunnel selection feature.

http://www.cisco.com/en/US/partner/ps6922/products_feature_guide09186a008067cf79.html

Hope this helps,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

The URL I just sent might not work for you. Please use this one instead.

http://www.cisco.com/en/US/ps6922/products_feature_guide09186a008067cf79.html

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

I believe Harold missed the /products/ folder in the link as a typo.

Anyways here is the link again which he wants you to use.

http://www.cisco.com/en/US/products/ps6922/products_feature_guide09186a008067cf79.html.

Sorry about that. Thanks Swaroop for posting the proper URL.

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

I think I've understand it. Just create the tunnel from PE to PE via a predefined path and a pseudowire-class using that tunnel and just apply the pw-class to xconnect. I wouldn't use TE since I'm not very familiar to it but I guess I will have to start look into it more closely.

Thanks for the help,

Cristian

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: