Rob Huffman Fri, 06/22/2007 - 04:36
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Jose,


CME support for SIP was first introduced in CME 3.4 and has evolved through CME 4.1 Have a look at the following;


CME 3.4


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a008055677f.html


Cisco Unified SIP IP Phone 7905G and Cisco Unified SIP IP Phone 7912 for Cisco CallManager Express 3.4


http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme34/cme34rc1.htm


Cisco Unified SIP IP Phone 7960G and Cisco Unified SIP IP Phone 7940G for Cisco CallManager Express 3.4


http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme34/cme34rc2.htm




CME 4.1


SIP Features for Cisco Unified CME 4.1,


http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme41/cme410ft.htm


How to Configure SIP Features for Cisco Unified CME 4.1


http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme41/cme410ft.htm#wp1049437


Hope this helps!

Rob

Actions

This Discussion