06-22-2007 03:24 AM - edited 03-14-2019 10:13 PM
Hello,
I need to know what is the version of CME who support the SIP protocol.
Thank you in advance
06-22-2007 04:36 AM
Hi Jose,
CME support for SIP was first introduced in CME 3.4 and has evolved through CME 4.1 Have a look at the following;
CME 3.4
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a008055677f.html
Cisco Unified SIP IP Phone 7905G and Cisco Unified SIP IP Phone 7912 for Cisco CallManager Express 3.4
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme34/cme34rc1.htm
Cisco Unified SIP IP Phone 7960G and Cisco Unified SIP IP Phone 7940G for Cisco CallManager Express 3.4
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme34/cme34rc2.htm
CME 4.1
SIP Features for Cisco Unified CME 4.1,
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme41/cme410ft.htm
How to Configure SIP Features for Cisco Unified CME 4.1
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme41/cme410ft.htm#wp1049437
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: