static nat

Unanswered Question
Jun 22nd, 2007

Hi,


we would like to setup static NAT. detail please refer attached file. we get the ip segment is foloiwng:


210.5.10.128 - 210.5.10.158


we set the NAT to inner segment (172.16.x.x).


router A

--------

ip route 210.5.10.129 255.255.255.255 210.5.10.157

ip route 210.5.10.129 255.255.255.255 210.5.10.157


router B

--------

!

ip nat outside source static 172.16.1.33 210.5.10.129

ip nat outside source static 172.16.1.36 210.5.10.130

!

interface GigabitEthernet0/0

ip nat outside

!

!

interface GigabitEthernet0/2

ip nat inside

!


however, it does not work, any missing? please advise







Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
royalblues Sat, 06/23/2007 - 00:04

I think the statements have been reversed here..


If G0/0 is the interface connecting to routerA, then your NAT statements should look like


ip nat inside source static 172.16.1.33 210.5.10.129

ip nat inside source static 172.16.1.36 210.5.10.130


or


ip nat outside source static 210.5.10.129 172.16.1.33

ip nat outside source static 172.16.1.36 210.5.10.130


Try this out and let us know


HTH, rate if it does

Narayan

Actions

This Discussion