Unanswered Question
Jun 23rd, 2007
User Badges:

Dear sir,

Iam looking for router plz suggest me the best router.

A multi port router is required to facilitate connectivity to various applications like Data Terminal (EIN.35), VoIP Equipment, Video Conferencing Equipment, Work Stations etc at each site. It will also provide flexibility to collect data centrally and forward to BEU before data is sent to IDU. The router design should be modular and based on a single unit solution with redundant power supply. It should have following features:

General Features

Mounting 19" RACK Mountable

DRAM Memory 766 MB

Flash Memory 256 MB

Packet Forwarding 150 Kbps or more

Scalability Vacant Slots/serial interface slots for future


VoIP Support Should support distributed call management Software to provide VoIP solution without requiring an centralized sever/gatekeeper etc.


Ethernet Ports 16 ports of 101100 Ethernet card with POE


Serial Interface

V.35 One Synchronous Serial Interfaces of 2 Mops


Serial Interface

V.35 One Synchronous Serial Interfaces of 2 Mops


E1/T1 Ports One E1 Port (6.703)

Optical Port One Optical GE port at central location only including additional hardware for integration to the router of terrestrial link.

Protocols and Network Management

Protocol support WAN Protocols Support

PPP over Ethernet

Static IP routing support

RIP Version 1 & 2 i




Network Address Translation


Multicast Routing Support

Should have lPv4 & IPv6 routing capability

for RIP

Should have IPv4 & IPv6 multicasting


GMP v2 & v3

Real Time Protocols- H.323 v1/v2 and SIP for VoIP and Video Conferencing.

Should support cRTP


Management Web based network management / SNMP


plz suggest me which ios and which router is capable to handle this application.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
paolo bevilacqua Sat, 06/23/2007 - 02:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


This would be, at minimum, a 2821 with the Poe PS, NM-16-ESW-PWR, WIC-1T, VWIC2-1MFT-T1/E1, and a PVDM2-xx correcly size depending on the exact application.

There are voice bundles that includes the PVD2-IS and IOS w/ voice features.

Please contact a cisco reseller to have the exact part list prepared and if you have some doubt ask here.

Hope this helps, please rate post if it does!


This Discussion