paolo bevilacqua Sat, 06/23/2007 - 07:01
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

It gets an address via DHCP or static config, then contacts the call manager via TFTP. It downloads a config file then registers.


hope this helps, please rate post if it does!



mmirghani Sat, 06/23/2007 - 07:15
User Badges:

Thanks

Do I need any IOS voice & DSP for Phone to connected to main site

paolo bevilacqua Sat, 06/23/2007 - 07:19
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You don't need any voice feature except on the router that is connected to the phone network, sometime called voice gateway.

What you may need, if the remote phones are connected via slow links, is QoS configuration on the routers that are connecting the slow links.

Thanks for the nice rating and good luck!

mmirghani Sat, 06/23/2007 - 07:42
User Badges:

Thanks for helpfull reply


My last question is i need IOS voice & DSP for my router , I only connected to main site via WAN only no PSTN needed in this setup


Thanks

paolo bevilacqua Sat, 06/23/2007 - 08:44
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hello,


As I said above, generally you do not need voice features and DSP except on a router that is connected the the telephone network, if any.


Actions

This Discussion