Cat6509 Power Error

kuan-ng · ‎06-23-2007

Hi,

I did a Sup720-3B upgrade on my 6509 Chasis (not 6509E Chassis). Pwr supply is 1300AC, high speed Fan tray. Everything was working fine, trunking, routing (bgp, ospf). But I encounter some error, what could have cause this?

I'm having 1 x 1300AC power supply

modules info, 1 x WS-X6148-GE-TX, 1 x WS-X6348-RJ-45, 1 x WS-SUP720-3B and 1 x WS-X6416-GBIC.

IOS 12.2(17d)SXB11a

00:07:00: SP: c6k_power assert failed: 'hwidb' at ../const/native-sp/c6k_power_port_mgmt.c:pd_get_sb 62

00:07:00: SP: -Traceback= 40522DC8 40526018 4052A1F0 402DB3D4 402DCDB0 402D72F4 402D7718 401140F8 401140E4

00:07:00: SP: c6k_power assert failed: 'hwidb' at ../const/native-sp/c6k_power_port_mgmt.c:pd_get_sb 62

00:07:00: SP: -Traceback= 40522DC8 40526018 4052A1F0 402DB3D4 402DCDB0 402D72F4 402D7718 401140F8 401140E4

Tks,

kuan

Jon Marshall · ‎06-24-2007

Hi Kuan

The Supervisor 720-3B requires at a minimum a 2500W AC or DC power supply. You need to upgrade your poweer supply.

Attached is the Sup720 data sheet for more details.

http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_data_sheet09186a0080159856.html

HTH

Jon