06-24-2007 11:03 AM - edited 03-03-2019 05:34 PM
Dear NetPro!
sh ip interface brief;int s0/0 up Protocole Down
action have been taken:int s0/0
sh
no sh
than the Interface goes Up until the next day.next day the same action have taken...plz exprts explain this issue ,and how to solve it?
10xs
06-24-2007 11:11 AM
Ali,
Have a look at this link on troubleshooting serial line problems
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a758d.shtml
HTH, rate if it does
Narayan
06-24-2007 12:20 PM
first, try "show log" and see why the interface went down.
If the log is too short, issue (config)#logging buffered 128000 informational, and wait for it to disconnect again.
06-27-2007 09:57 AM
Hi
10xs for ur great Replys
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
