ASA 5520 sub interfaces and NAT

Unanswered Question
Jun 25th, 2007
User Badges:

I am planning to divide outside interfaces into mutliple logical interfaces:


int Ethernet0/0.101

ip address x.x.237.2 255.255.255.248


int Ethernet0/0.102

ip address x.x.x.237.9 255.255.255.248


int Ethernet0/0.103

ip address x.x.x.237.9 255.255.255.128


I want to use static NAT's for the servers sitting on the inside interface. My question is can i use one static for traffic coming from all 3 interfaces or do i need to configure different static within the subinterfaces subnet range for each interface. Any help would be highly appreciated.


Thanks!


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion