ASA 5520 sub interfaces and NAT

nick.sidhu · ‎06-25-2007

I am planning to divide outside interfaces into mutliple logical interfaces:

int Ethernet0/0.101

ip address x.x.237.2 255.255.255.248

int Ethernet0/0.102

ip address x.x.x.237.9 255.255.255.248

int Ethernet0/0.103

ip address x.x.x.237.9 255.255.255.128

I want to use static NAT's for the servers sitting on the inside interface. My question is can i use one static for traffic coming from all 3 interfaces or do i need to configure different static within the subinterfaces subnet range for each interface. Any help would be highly appreciated.

Thanks!

wong34539 · ‎06-29-2007

You can configure different static NAT within the subinterfaces subnet range for each interface.

Try this link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a0080450b7d.html