×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

375-stack configuration

Answered Question
Jun 25th, 2007
User Badges:

Dears,

I have 2 3750 switches required to be stacked. Is there commands to enable stacking ? if there please send me

Thanks


Correct Answer by royalblues about 10 years 1 month ago

No configurations are required for stack connection.


Just connect the stack cables which came along between the switches.


If you want a certain switch to be a master then you can set the priority


HTH, rate if it does

Narayan



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
royalblues Tue, 06/26/2007 - 00:27
User Badges:
  • Green, 3000 points or more

No configurations are required for stack connection.


Just connect the stack cables which came along between the switches.


If you want a certain switch to be a master then you can set the priority


HTH, rate if it does

Narayan



Actions

This Discussion